Pc Turbo Soft

Caring tips Processor (CPU)

For that, you need some tips to keep the processor temperature, to ensure cooling processor (headsink) and fan can work properly.

Here are some things that need to be considered related to the processor:

1. Make sure the top of your processor has been smeared with Thermal Paste. Thermal Grease Thermal Paste or gel is a material that serves to remove heat from the processor to headsink. For silver-colored thermal paste has better quality than the white.

2. Make sure the casing has a current circulation path, because the casing is less circulation will cause the hardware components inside, including a processor, a faster heat.

Three. Trim the wires, particularly the type of ATA cables which are larger in size and width than the SATA cable. Cable tidy can facilitate the flow of air in the casing.

4. For personal computers, you may open the casing adpat, to smooth the effectiveness of air circulation, although perhaps not in accordance with the value of aesthetics and unpleasant because the hardware inside it looks from the outside.

The following key tips for caring for the processor:

1. Or disconnect the electrical contacts from your computer. Let stand a few moments to headsink cooler, then open headsink and fan of the processor.

2. Separate fan and headsink, then wipe with a damp cloth fan. Clean the slit headsink of dust, or wash using a soft brush or a brush. Drain and keep headsink no residual water in cracks headsink to avoid shorting (short).

Three. Put another fan with headsink, then attach them to the processor as in the past.

4. You can do the treatment 3 months, especially in air-conditioned room. However, if the environment a lot of dust, the treatment can be carried out once a month.

 

visit my site http://ariefblogher.blogspot.com/

About the Author

born in surakarta, date birth is 24 july 1995, like fried rice, and live in indonesia

http://ariefblogher.blogspot.com/
email : ahartawan26@yahoo.com

How do I know whether a Cpu Cooler Fan will be compatible?

I bought my computer ready built with an AVC CPU Cooler Fan, unfortunately it has just died on me and I need a replacement. After research I have found that my specific heatsink and fan are no longer in production and I don't know which cooler will be compatible with my system. I can only describe the cooler as a large cube heatsink with a fan on top, and to mount it to the motherboard it has two metal clips which straddle each side of the fan and heatsink and clip on to a plastic mounting on the motherboard on each corner at the bottom of the heatsink. This may sound complicated but I can hopefully clear up any confusion if you ask.

The Heat Sink should be fine, just replace the fan. It should say on the fan what size it is, as well as rotation and direction of airflow. Just buy a buy fan that matches the old one.